講述華為交換機堆疊命令實例，熟練掌握下面涉及到的華為交換機堆疊知識，你就會更輕松的選擇自己喜歡的方式來做好華為交換機堆疊的工作。很多方法都會使你豁然開朗的。

# 在交換機Switch A 上配置堆疊IP 地址池
[Quidway] stacking ip-pool 129.10.1.1 5
# 在交換機Switch A 上建立華為交換機堆疊
[Quidway] stacking enable
# 在主交換機Switch A 上顯示華為交換機堆疊信息
<stack_0. Quidway> display stacking
Main device for stack.
Total members:3
# 在主交換機Switch A 上顯示華為交換機堆疊成員信息
<stack_0. Quidway> display stacking members
Member number: 0
Name:stack_0.Quidway
Device:Quidway S3526
MAC Address:00e0.fc07.0bc0
Member status:Cmdr
Member number: 1
Name:stack_1.Quidway
Device:Quidway S3026
MAC Address:00e0.fc07.58a0
Member status:Up
Member number: 2
Name:stack_2.Quidway
Device:Quidway S3026
MAC Address:00e0.fc07.58a1
Member status:Up
# 切換到從交換機Switch B 上進行配置
<stack_0. Quidway> stacking 1
<stack_1. Quidway>
# 在從交換機Switch B 上顯示華為交換機堆疊信息
<stack_1. Quidway> display stacking
Slave device for stack.
Member number: 1
Main switch mac address:00e0.fc07.0bc0
# 切換回主交換機Switch A 上進行配置
<stack_1. Quidway> quit
# 切換到從交換機Switch C 上進行配置
<stack_0. Quidway> stacking 2
<stack_2. Quidway>
# 切換回主交換機Switch A 上進行配置
<stack_2. Quidway> quit
<stack_0. Quidway>