NAME (名稱)

eject - 彈出可移動介質  

SYNOPSIS(總覽)

eject -h.breject [-vnrsfq] [<name>]
eject [-vn] -d.breject [-vn] -a on|off|1|0 [<name>]
eject [-vn] -c slot [<name>]
eject [-vn] -t [<name>]  

DESCRIPTION(描述)

Eject 允許可移動介質(典型是 CD-ROM，軟盤，磁帶，或者 JAZ 以及 ZIP 磁盤) 在軟件控制下彈出．該命令也可以控制一些多盤片 CD-ROM 控制器，控制一些設備支持的自動彈出功能，以及控制一些 CD-ROM 驅動器磁盤托盤的關閉．與 name 相應的設備將被彈出．name 可以為設備文件或者其掛載點，也可以為完整路徑或者省略前面的 /dev 或者 /mnt 設備文件名．如果沒有指定 name，缺省使用 cdrom．有四種不同的彈出的方法，具體要看設備是 CD-ROM， SCSI設備， 可移動軟盤， 還是磁帶而定．默認的彈出會依次嘗試所有四種方法， 直到成功為止． 如果設備當前是掛載上來的， 那么在彈出前要先卸載．

COMMAND-LINE OPTIONS (命令-行選項)

-h

該選項使得 eject 顯示關于命令選項的簡要描述．

-v

令 eject 在冗長模式下運行； 顯示更多的關于命令作什么用的信息．

-d

如果調用了這個選項， eject 會顯示默認的設備名．

-a on|1|off|0

該選項控制一些設備支持的自動彈出模式． 當激活時， 驅動器自動在設備關閉時彈出．

B -c <slot>

有了這個選項， 可由 ATAPI/IDE CD-ROM 控制器選擇一個 CD 槽． Linux 2.0 或者更高版本要求使用該功能．CD-ROM 驅動器不能在正使用時 (已掛載數據 CD 或者在播放音樂 CD)響應工作改變請求．還要注意控制器的第一個槽設為 0，而不是 1．

-t

有了這個選項， 會發一個關閉 CD-ROM 托盤的命令給驅動器．不是所有的設備都支持該命令．

-n

有了這個選項， 顯示選定的設備， 但是不執行任何動作．

-r

該選項指定了使用 CDROM 彈出命令應被彈出的驅動器．

-s

該選項指定了使用 SCSI 命令應被彈出的驅動器．

-f

該選項指定了使用可移動軟盤彈出命令應被彈出的驅動器．

B -q

該選項指定了使用磁帶驅動器離線命令應被彈出的驅動器．

LONG OPTIONS(長選項)

所有選項與以下列出的長名字相關． 只要長名字縮寫唯一， 它就可以縮寫． 

EXAMPLES(示例)

eject

彈出名字為 cdrom 的設備或者掛載點：

eject cdrom

使用設備名來彈出：

eject /dev/cdrom

使用掛載點來彈出：

eject /mnt/cdrom/

eject hdd

彈出第一個 SCSI 設備：

eject sda

使用 SCSI 分區名(例如 ZIP 設備)來彈出 :.IP eject sda4

在多盤片控制器上選擇第五個磁盤：

eject -v -c5 /dev/cdrom

在 SoundBlaster CD-ROM 驅動器上開啟自動彈出功能：

eject -a on /dev/sdpcd

EXIT STATUS(退出狀態)

如果操作成功， 返回 0， 如果操作失敗或者命令語法無效， 則返回 1． 

NOTES(備注)

Eject 只對支持四種彈出方式其中之一或更多的設備起作用．這些設備包括大多數的 CD-ROM 驅動器 (IDE, SCSI 和專有接口的)，一些 SCSI 磁帶驅動器， JAZ 驅動器， ZIP 驅動器(并口， SCSI 以及 IDE 版本接口的)，以及 LS120 可移動軟盤． 用戶已經報告過在 Sun SPARC 和 Apple Macintosh 系統上的軟盤驅動器也成功了． 如果 eject 不起作用， 最可能的原因是由于設備的內核驅動的限制， 而并非 eject 程序本身的問題． -r， -s， -f 和 -q 選項可以控制彈出的方式．可指定一種以上的方式． 如果沒有指定任何這些選項， 它會嘗試所有四種方式(這在多數情況下工作很好)． Eject 不一定總是能判斷設備是否已經掛載(例如， 如果設備有多個名字)．如果設備名是一個符號鏈接， eject 會跟隨該鏈接并使用其指向的設備．

如果 eject 判斷設備能有多個分區， 它會嘗試在彈出前卸載所有該設備已掛載的分區．如果卸載失敗， 程序不會嘗試彈出該介質．

你可以彈出音頻 CD．如果驅動器為空， 一些 CD-ROM 驅動器會拒絕打開其托盤． 一些設備不支持托盤關閉的命令． 如果激活了自動彈出的功能．那么驅動器總會在運行該命令后彈出． 不是所有的 Linux 內核 CD-ROM 驅動程序都支持自動彈出模式．

你需要適當?shù)奶貦?quán)以訪問設備文件． 在彈出一些設備(例如， SCSI 設備)時，要求以 root 或者 setuid root 的身份運行．

用來找到給定名字的設備的搜索方法如下． 如果名字以標記斜線結束，它將被移去(這是為了支持使用 shell 文件名補全所生成的文件名）．如果名字以 '.' 或 '/' 開頭， 它會試圖以設備文件名或者掛載點打開它．如果那樣失敗了， 它會嘗試在名字前面補加 '/dev/'， '/mnt'， 直到找到的設備文件名或者能夠打開掛載點為止．程序檢查 /etc/mtab 以獲知已掛載的設備． 如果那樣也失敗了，它還會檢查 /etc/fstab 以獲知當前未掛載設備的掛載點．推薦創建如 /dev/cdrom 或者 /dev/zip 之類的符號鏈接，這樣 eject 可以使用易記的名字決定合適的設備． 為了節約輸出，你可以創建一個適合于你的特定配置的針對 eject 選項的 shell 別名．  

AUTHOR(作者)

Eject 由 Jeff Tranter (tranter@pobox.com) 寫成， 并在 GNU 通用出版許可的條例下發布．參看源文件中的文件 COPYING 和注釋以獲知詳情．  

又見

mount(2), umount(2), mount(8), umount(8) 

#p#

NAME

eject - eject removable media  

SYNOPSIS

eject -h
eject [-vnrsfqp] [<name>]
eject [-vn] -d
eject [-vn] -a on|off|1|0 [<name>]
eject [-vn] -c slot [<name>]
eject [-vn] -t [<name>]
eject [-vn] -x <speed> [<name>]
eject -V

DESCRIPTION

Eject allows removable media (typically a CD-ROM, floppy disk, tape, or JAZ or ZIP disk) to be ejected under software control. The command can also control some multi-disc CD-ROM changers, the auto-eject feature supported by some devices, and close the disc tray of some CD-ROM drives.

The device corresponding to <name> is ejected. The name can be a device file or mount point, either a full path or with the leading "/dev" or "/mnt" omitted. If no name is specified, the default name "cdrom" is used.

There are four different methods of ejecting, depending on whether the device is a CD-ROM, SCSI device, removable floppy, or tape. By default eject tries all four methods in order until it succeeds.

If the device is currently mounted, it is unmounted before ejecting.

COMMAND-LINE OPTIONS

-h

This option causes eject to display a brief description of the command options.

-v

This makes eject run in verbose mode; more information is displayed about what the command is doing.

-d

If invoked with this option, eject lists the default device name.

-a on|1|off|0

This option controls the auto-eject mode, supported by some devices. When enabled, the drive automatically ejects when the device is closed.

-c <slot>

With this option a CD slot can be selected from an ATAPI/IDE CD-ROM changer. Linux 2.0 or higher is required to use this feature. The CD-ROM drive can not be in use (mounted data CD or playing a music CD) for a change request to work. Please also note that the first slot of the changer is referred to as 0, not 1.

-t

With this option the drive is given a CD-ROM tray close command. Not all devices support this command.

-x <speed>

With this option the drive is given a CD-ROM select speed command. The speed argument is a number indicating the desired speed (e.g. 8 for 8X speed), or 0 for maximum data rate. Not all devices support this command and you can only specify speeds that the drive is capable of. Every time the media is changed this option is cleared. This option can be used alone, or with the -t and -c options.

-n

With this option the selected device is displayed but no action is performed.

-r

This option specifies that the drive should be ejected using a CDROM eject command.

-s This option specifies that the drive should be ejected using SCSI commands.

-f

This option specifies that the drive should be ejected using a removable floppy disk eject command.

-q

This option specifies that the drive should be ejected using a tape drive offline command.

-p

This option allow you to use /proc/mounts instead /etc/mtab. It also passes the -n option to umount(1).

-V

This option causes eject to display the program version and exit.

LONG OPTIONS

All options have corresponding long names, as listed below. The long names can be abbreviated as long as they are unique.

-h --help
-v --verbose
-d --default
-a --auto
-c --changerslot
-t --trayclose
-x --cdspeed
-n --noop
-r --cdrom
-s --scsi
-f --floppy
-q --tape
-V --version
-p --proc 

EXAMPLES

Eject the default device:

eject

Eject a device or mount point named cdrom:

eject cdrom

Eject using device name:

eject /dev/cdrom

Eject using mount point:

eject /mnt/cdrom/

Eject 4th IDE device:

eject hdd

Eject first SCSI device:

eject sda

Eject using SCSI partition name (e.g. a ZIP drive):

eject sda4

Select 5th disc on mult-disc changer:

eject -v -c5 /dev/cdrom

Turn on auto-eject on a SoundBlaster CD-ROM drive:

eject -a on /dev/sbpcd

EXIT STATUS

Returns 0 if operation was successful, 1 if operation failed or command syntax was not valid.

NOTES

Eject only works with devices that support one or more of the four methods of ejecting. This includes most CD-ROM drives (IDE, SCSI, and proprietary), some SCSI tape drives, JAZ drives, ZIP drives (parallel port, SCSI, and IDE versions), and LS120 removable floppies. Users have also reported success with floppy drives on Sun SPARC and Apple Macintosh systems. If eject does not work, it is most likely a limitation of the kernel driver for the device and not the eject program itself.

The -r, -s, -f, and -q options allow controlling which methods are used to eject. More than one method can be specified. If none of these options are specified, it tries all four (this works fine in most cases).

Eject may not always be able to determine if the device is mounted (e.g. if it has several names). If the device name is a symbolic link, eject will follow the link and use the device that it points to.

If eject determines that the device can have multiple partitions, it will attempt to unmount all mounted partitions of the device before ejecting. If an unmount fails, the program will not attempt to eject the media.

You can eject an audio CD. Some CD-ROM drives will refuse to open the tray if the drive is empty. Some devices do not support the tray close command.

If the auto-eject feature is enabled, then the drive will always be ejected after running this command. Not all Linux kernel CD-ROM drivers support the auto-eject mode. There is no way to find out the state of the auto-eject mode.

You need appropriate privileges to access the device files. Running as root or setuid root is required to eject some devices (e.g. SCSI devices).

The heuristic used to find a device, given a name, is as follows. If the name ends in a trailing slash, it is removed (this is to support filenames generated using shell file name completion). If the name starts with '.' or '/', it tries to open it as a device file or mount point. If that fails, it tries prepending '/dev/', '/mnt/', '/dev/cdroms', '/dev/rdsk/', '/dev/dsk/', and finally './' to the name, until a device file or mount point is found that can be opened. The program checks /etc/mtab for mounted devices. If that fails, it also checks /etc/fstab for mount points of currently unmounted devices.

Creating symbolic links such as /dev/cdrom or /dev/zip is recommended so that eject can determine the appropriate devices using easily remembered names.

To save typing you can create a shell alias for the eject options that work for your particular setup.

AUTHOR

Eject was written by Jeff Tranter (tranter@pobox.com) and is released under the conditions of the GNU General Public License. See the file COPYING and notes in the source code for details.

The -x option was added by Nobuyuki Tsuchimura (tutimura@nn.iij4u.or.jp), with thanks to Roland Krivanek (krivanek@fmph.uniba.sk) and his cdrom_speed command.

SEE ALSO

mount(2), umount(2), mount(8), umount(8)
/usr/src/linux/Documentation/cdrom/