Linux DHCP服務器的設置
作者：佚名
下面我們針對Linux DHCP服務器的內容再來做一下介紹。在Linux系統中進行DHCP的設置是我們需要掌握的重點之一。
Linux系統現在很火爆。隨著這個系統的不斷壯大，很多設置都需要在這之上進行。那么這里我們就闡述一下Linux DHCP服務器的設置過程，那么大家一起來看一下如何進行Linux DHCP服務器的設置吧。
Linux DHCP服務器配置
1.安裝Linux DHCP服務軟件包
RHEL4第四張光盤，dhcp-3.0.1-12_EL.i386.rpm
掛載 mount /dev/cdrom /media/cdrom/
安裝DHCP包
- rpm -ivh /media/cdrom/RedHat/RPMS/dhcp-3.0.1-12_EL.i386.rpm
2. dhcp.conf配置文件解析
復制樣例文件到 /etc/
- cp /usr/share/doc/dhcp-3.0.1/dhcpd.conf.sample /etc/dhcpd.conf
Linux DHCP服務器配置實例
- Ddns-update-style interim;
- Ignore client-updates;
- Subnet 10.0.0.0 netmask 255.0.0.0 {
- # --- default gateway
- option routers “10.0.0.0.1”;
- option subnet-mask “255.0.0.0”;
- # option nis-domain “domain.org”;
- # option domain-name "domain.org";
- # option domain-name-servers 10.0.0.1;
- # option time-offset -18000; # Eastern Standard Time
- # option ntp-servers 192.168.1.1;
- # option netbios-name-servers 192.168.1.1;
- # --- Selects point-to-point node (default is hybrid). Don't change this unless
- # -- you understand Netbios very well
- # option netbios-node-type 2;
- range dynamic-bootp 10.0.0.100 10.0.0.200;
- default-lease-time 21600;
- max-lease-time 43200;
- "/etc/dhcpd.conf" 31L, 852C 1,1
- # we want the nameserver to appear at a fixed address
- host ns {
- next-server marvin.redhat.com;
- hardware ethernet 12:34:56:78:AB:CD;
- fixed-address 207.175.42.254;
- }
- }
3.Linux DHCP服務器多網絡接口時需要配置文件
- /etc/sysconfig/dhcpd
- DHCPDARGS=[網絡接口]
4. 啟動dhcpd服務
- Service dhcpd start
5. 客戶端配置動態獲取IP
責任編輯：佟健
來源：
互聯網
