在AIX系統中，我們?nèi)绾伍_啟NFS呢？這個問題本文來幫助大家解決一下。首先讓我們看看都需要哪些準備工作。具體過程如下：

1、準備AIX服務器

默認安裝完AIX5.3后,先停止nfs和portmap兩個進程,然后刪掉一些和NFS有關的文件

# stopsrc -g nfs

0513-044 The biod Subsystem was requested to stop.

0513-044 The nfsd Subsystem was requested to stop.

0513-044 The rpc.mountd Subsystem was requested to stop.

0513-044 The rpc.lockd Subsystem was requested to stop.

0513-044 The rpc.statd Subsystem was requested to stop.

#

-g表示停止一組nfs相關的進程

# stopsrc -s portmap

0513-044 The portmap Subsystem was requested to stop.

#

# cd /etc

# rm -rf sm sm.bak state xtab rmtab

2、配置AIX的NFS服務器

可以直接手動配置/etc/exports或使用smit工具配置,因?yàn)锳IX的NFS和Linux的配置文件內容不同,所以建議使用smit工具來配

這是我通過smit配置好的/etc/exports文件內容:

# cat /etc/exports

/mnt -sec=sys:krb5p:krb5i:krb5:dh:none,rw,root=192.168.3.160,access=192.168.3.161:192.168.3.160

#

我將/mnt目錄共享出去,設置只允許192.168.3.160可以對共享目錄寫操作,能夠訪問的服務器有192.168.3.161和192.168.3.160,sec是數據加密方法.配置完后,使用exportfs命令將/etc/exports的內容更新至/etc/xtab文件中,/etc/xtab文件是NFS讀取的內容,所以這步很關鍵,如果不用這個命令,其它的節點是無法正確掛載NFS共享目錄的:

# exportfs -a

這里要注意一下:NFS客戶端的IP地址要寫到/etc/hosts文中,并要指定機器名,否則是無法掛載AIX上的NFS共享目錄

3、啟動NFS并測試

# startsrc -s portmap

0513-059 The portmap Subsystem has been started. Subsystem PID is 233644.

# startsrc -g nfs

0513-059 The biod Subsystem has been started. Subsystem PID is 245894.

0513-059 The nfsd Subsystem has been started. Subsystem PID is 213136.

0513-059 The rpc.mountd Subsystem has been started. Subsystem PID is 172270.

0513-059 The nfsrgyd Subsystem has been started. Subsystem PID is 217294.

0513-059 The gssd Subsystem has been started. Subsystem PID is 221400.

0513-059 The rpc.lockd Subsystem has been started. Subsystem PID is 217296.

0513-059 The rpc.statd Subsystem has been started. Subsystem PID is 221402.

#

在AIX上查看NFS的共享目錄

# showmount -e localhost

export list for localhost:

/mnt (everyone)

#

在Linux上查看AIX的NFS共享目錄:

test01:~ # showmount -e 192.168.3.162

Export list for 192.168.3.162:

/mnt (everyone)

test01:~ #

Linux系統掛載NFS目錄

test01:~ # mount 192.168.3.162:/mnt /mnt.

本篇文章來源于 黑客天下 原文鏈接:http://www.hack4.com/article/hack4-10061.html